Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2013 335I Coupe.
The 2013 BMW 335I Coupe marks the final iteration of the E92 passenger-car chassis, paired with the S6 automatic transmission and carrying an engine oil capacity of 6.9 quarts specified for 0W-30, 0W-40, or 5W-30 viscosity grades. EPA testing certified the powertrain at 18 mpg city, 27 mpg highway, and 21 mpg combined. Reliability records for this model year document 64 total owner complaints with air bags constituting the primary area of concern alongside three official recalls, positioning the 2013 variant as a specific data point in the E92 lineage that requires focused scrutiny of supplemental restraint systems during technical research.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 570 CCA battery, OE oil filter 11428683168. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11428683168 alt 11428637821 |
| Engine air filter | 13717602643 alt 13718616909 |
| Spark plug | 12120037582 |
| Battery | 61217586961 alt 61217586962 |
| Front wiper blades | 61612455435 alt 61612455437 |
| Cabin air filter | 64119237555 alt 64116821995 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 182.3 in |
| Overall width | 71.3 in |
| Overall height | 56.3 in |
| Wheelbase | 110.6 in |
| Curb weight | 3571 lb |
| Track (front / rear) | 60.6 / 62.2 in |
| Weight distribution (front / rear) | 52/48 |
| EPA city / highway / combined | 18 / 27 / 21 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 6.9 qt of 0W-30 / 0W-40 / 5W-30 engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Automatic Transmission Fluid | BMW part number 83222152426 |
| Automatic Transmission Fluid Capacity | 10.5-11.5 |
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 2 Pints |
| Engine Oil | 0W-30 · 0W-40 · 5W-30 · 5W-40 |
| Engine Oil Capacity | 6.9 qt |
| Manual Transmission Fluid | BMW MTF part number 83222167666 |
| Manual Transmission Fluid Capacity | 2.1-2.5 |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | 11 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.19-1.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 5.70-6.50 oz |
| Optional BCI Group Number | 94R |
| Optional BCI Cranking Performance | 640 cca |
| Standard BCI Group Number | 48 |
| Engine Compression | 145-232 PSI. 29 maximum variation. psi |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.866 in |
| Rotor Nominal Thickness To | 0.866 in |
| Rotor Discard at or Under | 0.803 in |
| 1 | 15 ft. lbs., Step 2: 140 | 15 ft. lbs |
Prep Do not reuse old bolts
| 1 | 22.0 ft. lbs. | 22 ft. lbs |
| 2 | 90 degrees | 90 degrees |
| 3 | Bolts 1-10 90 degrees | 90 degrees |
| 4 | 45 degrees | 45 degrees |
| 1 | 6 ft. lbs., Step 2: 9.6 | 6 ft. lbs |
| 1 | 15 ft. lbs., Step 2: 70 | 15 ft. lbs |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2013 BMW 335I Coupe top in one area — the air bags, 9 of 64 reports (14%), well ahead of the next concern. That matters, because the air bags are also the target of recall 20V-017 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 7 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 64 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 2 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013… Remedy: BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The…
BMW North America, LLC (BMW) is recalling certain model year 2012-2015 320i, 320xi, 328i, 328xi, 335i, 335xi, and ActiveHybrid3 vehicles manufactured October 20, 2011, to June 22, 2015, 2014-2015 328xi Sports Wagon… Remedy: BMW will notify owners, and dealers will upload revised software to correct the issue, free of charge. The recall began on October 7, 2015. Owners may contact BMW customer service…
Showing 5 of 628 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2025-02-20 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B131110 | 2024-09-16 | Fuel/Propulsion System | Only fuel nozzles with the recommended “specified” diameter for diesel engine passenger… |
| B063824 | 2024-05-03 | Unknown Or Other | Radio R/C with FEM Return |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
6.9 qt of 0W-30, 0W-40, 5W-30, 5W-40 OIL MEETING BMW SPECIFICATION LL01, per the factory manual.
NHTSA lists 3 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 18 city / 27 highway / 21 combined mpg.