Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 335D.
The 2011 BMW 335D passenger car utilizes the E90 platform and an Automatic (S6) transmission, with an engine requiring 7.7 qt of oil in viscosities of 15W-40 / 10W-40 / 10W-30 API SJ. These mechanical specifications support EPA mpg of 23/35/27 mpg, setting the efficiency baseline for the model year. Beyond performance, the vehicle's history includes 10 recalls and 58 total owner complaints, where the top complaint area is Air Bags. For researchers, this data places the 2011 model at a juncture in the reliability timeline where safety system integrity requires as much attention as mechanical upkeep.
Fluid capacities, tune-up values and fuel economy at a glance.
Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.
From the factory this vehicle uses a BCI 48 · 760 CCA battery, OE oil filter 11427788460. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.
| Engine oil filter | 11427788460 alt 11427788458 |
| Engine air filter | 13717797465 |
| Fuel filter | 13327793672 |
| Front wiper blades | 61612455435 |
| Thermostat | 11517787692 alt 11517805811 |
| Cabin air filter | 64319313519 alt 64319142114 |
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S6) |
| Overall length | 178.3 in |
| Overall width | 71.7 in |
| Overall height | 55.9 in |
| Wheelbase | 108.7 in |
| Curb weight | 3825 lb |
| Track (front / rear) | 59.1 / 59.4 in |
| Weight distribution (front / rear) | 50/50 |
| EPA city / highway / combined | 23 / 35 / 27 mpg |
| Drivetrain | Rear-Wheel Drive |
| Passenger volume | 93 cu ft |
| Cargo volume | 12 cu ft |
| Recommended fuel | Diesel |
Capacities, torques and tune-up values from the factory service manual.
This engine holds 7.7 qt of 15W-40 / 10W-40 / 10W-30 API SJ engine oil, DOT 4 brake fluid. Torque lug nuts to 88 ft-lbs, the oil drain plug to M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.
| Brake Fluid | DOT 4 |
| Differential Gear Oil Capacity | 1.2 Pints |
| Differential Gear Oil Capacity | 2 Pints |
| Engine Coolant | ETHYLENE GLYCOL |
| Engine Oil | 15W-40 · API · 10W-40 · 10W-30 · 5W-30 |
| Engine Oil Capacity | 7.7 qt |
| Power Steering Fluid | Use Pentosin CHF 11S |
| Power Steering Fluid | ATF |
| Crankshaft Pulley and/or Damper Bolts | 18 ft-lbs |
| Intake Manifold to Engine Bolts | M6 bolts: 6 ft-lbs, M7 nuts: 9.6 ft-lbs |
| Exhaust Manifold to Cylinder Head Bolts | 15 ft-lbs |
| Engine Oil Pan Drain Plug | M12 Bolts: 18.0, M22 Bolts: 44.0 ft-lbs |
| Lug Nuts | 88 ft-lbs |
| Cylinder Firing Order | 1-5-3-6-2-4 |
| Spark Plug Manufacturer | BMW |
| Refrigerant | R134a |
| Refrigerant Capacity | 1.19-1.40 lbs |
| Oil Group | PAG |
| Oil Type | 46 |
| Oil Capacity | 5.70-6.50 oz |
| Standard BCI Group Number | 48 |
| Standard BCI Cranking Performance | 760 cca |
| Optional BCI Group Number | 49 |
| Brake Application | WITH FN3 |
| Torque to Knuckle | 81 ft-lbs |
| Minimum Pad Thickness | Front: 0.145; Rear: 0.145 pads |
| Brake Application | WITH FN3 |
| Rotor Nominal Thickness From | 0.866 in |
| Rotor Nominal Thickness To | 0.866 in |
| Rotor Discard at or Under | 0.803 in |
| 1 | 30 ft. lbs., step 2: 120 | 30 ft. lbs |
Prep Do not reuse old bolts. Coat new bolts with the specified engine oil.
| 1 | 59.0 ft. lbs. | 59 ft. lbs |
| 2 | loosen all bolts 180 degrees starting from the outside working to the inside. | 180 degrees |
| 3 | 37.0 ft. lbs. | 37 ft. lbs |
| 4 | 90 degrees | 90 degrees |
| 5 | 90 degrees | 90 degrees |
Normal service, condensed from the factory interval matrix.
| At 120,000 mi | Oxygen Sensor (replace) |
Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.
Owner complaints about the 2011 BMW 335D top in one area — the air bags, 10 of 58 reports (17%), well ahead of the next concern. None of this vehicle's 6 recall campaigns target the air bags, so those reports read as owner-reported wear-and-tear rather than an acknowledged defect. 1 of the reports describe a crash and 2 a fire — a small share of the total, but worth weighing against the air bags pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.
All 58 complaints on record, top 8 components.
Source: NHTSA Office of Defects Investigation complaint database.
Showing 2 of 6 campaigns on record for this vehicle.
BMW of North America, LLC (BMW) is recalling certain 2009 328i and 328xi, 2009-2011 335d, 2008-2012 M3 Coupe and M3 Convertible, and 2008-2011 M3 Sedan vehicles. The connection of the positive battery cable at the fuse… Remedy: BMW will notify owners, and dealers will replace and secure the positive battery cable connector, free of charge. The recall began August 14, 2019. Owners may contact BMW customer…
BMW of North America, LLC (BMW) is recalling certain 2010-2011 BMW 335d vehicles with diesel engines. The connection of the positive battery cable at the fuse box terminal may degrade over time, possibly resulting in an… Remedy: BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on June 29, 2018…
Showing 5 of 127 bulletins on record with NHTSA.
| Bulletin | Date | Component | Summary |
|---|---|---|---|
| B012016 | 2025-03-13 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B012016 | 2025-02-20 | Electrical System | The Footwell Module (FRM) limited warranty for defects in materials and / or workmanship… |
| B510819 | 2024-01-16 | Electrical System | The basic conditions for initializing the power windows are not met. |
| B611305 | 2024-01-11 | Electrical System | The electrical system of BMW vehicles has been subject to an ongoing development process… |
| SB23-01 | 2023-08-02 | Steering | Spl Parts, Inc. communications index accompanying MCP uploads 23mc40464 & 23mc40471 |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.
Cross-vehicle references for the kinds of data on this page.
7.7 qt of HIGH PERFORMANCE MINERAL OILS: ABOVE 5 degrees F: 15W-40 API SJ, SL OR SM, -5 degreesF TO 68 degrees F: 10W-40 API SJ, SL OR SM, 5 degreesF TO 50 degrees F: 10W-30 API SJ, SL OR SM, BELOW 50 degrees F: 5W-30 API SJ, SL OR SM, BELOW 32 degrees F:, per the factory manual.
NHTSA lists 10 recall campaign(s) for this model year. Check your specific vehicle by VIN.
EPA figures are 23 city / 35 highway / 27 combined mpg.