Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2026 230i.
The 2026 BMW 230i is EPA-rated at 26/35/30 mpg city/highway/combined.
Fluid capacities, tune-up values and fuel economy at a glance.
Engine, drivetrain, dimensions and economy.
| Transmission | Automatic (S8) |
| Overall length | 179.1 in |
| Overall width | 72.4 in |
| Overall height | 54.7 in |
| Wheelbase | 107.9 in |
| Curb weight | 3739 lb |
| Track (front / rear) | 62.2 / 62.6 in |
| Weight distribution (front / rear) | 53/47 |
| EPA city / highway / combined | 26 / 35 / 30 mpg |
| Drivetrain | Rear-Wheel Drive |
| Recommended fuel | Premium Gasoline |
0–60 mph, quarter-mile, horsepower and torque from independent road tests.
Independent road tests for the 230i of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.
| Year | Trim / engine | 0–60 | ¼ mile | HP | Drivetrain |
|---|---|---|---|---|---|
| 2022 | Coupe (M Sport) 2.0L Turbo I-4 | 5.10 sec | 13.70 sec | 255 hp | RWD |
| 2022 | Coupe (M Sport) 2.0L Turbo I-4 | 5.30 sec | 13.90 sec | 255 hp | RWD |
The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.
Decode factory build data for a specific vehicle by VIN.
Cross-vehicle references for the kinds of data on this page.
EPA figures are 26 city / 35 highway / 30 combined mpg.