AudiTT/TTS2017Overview/audi/tt-tts/2017/base/

2017 Audi TT/TTS

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 TT/TTS.

The 2017 Audi TT/TTS is the model year under discussion, with an engine that calls for 6.0 qt of oil. Audi’s complaint history for the TT/TTS spans the 2000‑2013 model years, peaking at 132 complaints in 2001 and bottoming out at just 1 complaint in 2007. Because the 2017 model falls outside that 2000‑2013 window, the available complaint data does not directly cover its reliability, leaving its standing to be assessed from newer sources.

Model year20172015

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity6.0 qtOEM · verified
Lug nut torque89 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 06L115562B. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Tire sizeP245/40R18OEM · verified
Wheel / rim8.5-J; OPTIONAL: 9.0-J inOEM · verified

OE service part numbers OEM · verified

Engine oil filter06L115562B
Engine air filter5Q0129620B
Spark plug06K905601B
Battery000915089G alt 000915089BD
Front wiper blades8S1998002
Serpentine belt06L903137A
Cabin air filter5Q0819669

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine DOT 4 brake fluid. Torque lug nuts to 89 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake FluidDOT 4
Engine CoolantUse Audi coolant part number G13TL-VW774J
Engine Coolant Capacity10.5
Engine Oil Capacity6.0 qt
Power Steering FluidUse Audi/VW part number G004000M2

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Engine Coolant Temperature (ECT) Sensor Bolt(s)7.4 ft-lbs
Oxygen (O2S) Sensor Bolt(s)30.0 ft-lbs
Knock Sense (KS) Bolt(s)14.75 ft-lbs
Intake Manifold to Engine Bolts6.6 ft-lbs
Exhaust Manifold to Cylinder Head Bolts18.4 ft-lbs
Nitrogen Oxide (NOX) Sensor Bolt(s)35.0 ft-lbs

Chassis torques

Differential Fill Plug18.0 ft-lbs
Differential drain Plug18.0 ft-lbs
Lug Nuts89 ft-lbs
Transfer Case Fill Plug9.0 ft-lbs
Transfer Case Drain Plug9.0 if equipped with drain plug ft-lbs
Automatic Transmission Drain Plug18.0-22.0 ft-lbs

Ignition

Cylinder Firing Order1-3-4-2
Spark Plug Torque22.0 ft-lbs

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.04-1.15 lbs
Oil GroupPAG
Oil Type46
Oil Capacity3.40-4.00 oz

Service checks

Engine Compression159-203 PSI @ RPM; 44 MAXIMUM VARIATION. psi

Brakes

Brake Caliper Bolt to Carrier TorqueFront: 22.0; Rear: 26 Use
Brake Caliper Carrier to Hub Bolt TorqueFront: 145; Rear: 75 use
ABS Sensor Torque6.6
Minimum Pad ThicknessFront: 0.393; Rear: 0.354 in
Vented Rotor Minimum Thickness for ReplacementFront w/1LJ and 1ZD:
Vented Rotor Minimum Thickness after RefinishStamped on rotor

Multi-step torque procedures OEM · verified

Front Wheel Hub — tightening sequence 1 stages

Prep Using new bolt

1146.0 ft. lbs., Step 2: 180 degrees.146 ft. lbs
Connecting Rod (Large End) Bearings — tightening sequence 1 stages

Prep Gasoline engines

133.0 ft. lbs., Step 2: 90 degrees; Diesel engines33 ft. lbs
122.0 ft. lbs., Step 2: 9022 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
1110.0 ft. lbs. Step 2: + 90110 ft. lbs
Cylinder Head — tightening sequence 4 stages

Prep Do not re-use old bolts. · Long head bolts

1Tighten all bolts finger tight.
230.0 ft. lbs.30 ft. lbs
390 degrees90 degrees
490 degrees; Short head bolts (located in front of head)90 degrees
13.0 ft. lbs.3 ft. lbs
290 degrees90 degrees
Engine Flywheel Bolts — tightening sequence 2 stages
144.0 ft. lbs.44 ft. lbs
290
Main Bearings — tightening sequence 1 stages

Prep Gas engines · Cap bolts: Step 1: 48.0 ft. lbs., Step 2: 90 degrees, Side bolts: Step 1: 15.0 ft. lbs., Step 2: 90 degrees · Diesel engines

148.0 ft. lbs., Step 2: 9048 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 10,000 mi; spark plugs every 40,000 mi.

Every 10,000 miBrake System (inspect) · Engine Assembly (leak inspection) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Tire & Wheel Assembly (inspect) · Tire Pressure Monitoring System (reset)
Every 20,000 miBattery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Drive Axle Assembly (inspect) · Engine Coolant System (inspect fluid level)
Every 40,000 miBrake Rotor (inspect) · Spark Plugs (replace) · Transmission Fluid & Filter (replace)
Every 60,000 miEngine Air Filter Element (replace) · Engine Air Filter Housing (clean)
Every 80,000 miAccessory Drive Belt (inspect)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

1
Open recalls
NHTSA campaigns
0
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
0
Owner complaints
0 involved a crash · 0 a fire
Owner complaints by model year NHTSA · this generation & adjacent

No owner complaints on record with NHTSA for this vehicle.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

20V076000Fuel System, Gasoline:Storage:Tank AssemblyReported 12/02/2020

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2016-2019 Audi TT Roadster Quattro and TT Coupe Quattro vehicles. In the event of a crash, the fuel tank may become damaged by the fuel tank heat… Remedy: Volkswagen will notify owners, and dealers will install a protective cap on the fuel tank heat shield bracket, free of charge. The recall began March 19, 2020. Owners may contact…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific TT/TTS. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2017 TT/TTS take?

6.0 qt of Use only oil meeting Audi/VW specification 502.00, per the factory manual.

Does the 2017 TT/TTS have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.