AudiQ72011Overview/audi/q7/2011/base/

2011 Audi Q7

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2011 Q7.

Body SUVTransmission Automatic (S8)

The 2011 Audi Q7 is a mid‑size SUV built on Audi’s modular platform and powered by a V‑series engine that requires an 8.6‑quart oil fill of 5W‑30, 5W‑40 or 0W‑40 viscosity, while delivering EPA ratings of 16 mpg city, 21 mpg highway and 18 mpg combined through its S8 automatic transmission. Owner feedback for this year records a modest 23 total complaints, with visibility and wiper issues emerging as the most frequent concern and four manufacturer recalls documented. Positioned within the model’s 2007‑2026 production span, the 2011 Q7 sits well before the peak complaint year of 2017 and far above the recent low of 2024, indicating a generally respectable reliability record for its era.

Model year202620252024202320222021202020192011

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity8.6 qtOEM · verified
Engine oil type5W-30 / 5W-40 / 0W-40 APIOEM · verified
Lug nut torque118 ft-lbsOEM · verified
EPA fuel economy16/21/18 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses a BCI 94R Diesel · 640 Diesel CCA battery, OE oil filter 06D115475. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Battery groupBCI 94R Diesel · 640 Diesel CCAOEM · verified
Tire sizeP255-55R18OEM · verified

OE service part numbers OEM · verified

Engine oil filter06D115475 alt 057198405B
Engine air filter7L0129620 alt 7L0129620A
Fuel filter7L8919679 alt 8K0127400A
Spark plug101905611G alt 101905631G
Battery000915089J alt 000915089K
Front wiper blades4L1955426B alt 4L1955425C
Thermostat059121139A alt 06E121119B
Cabin air filter7E0819631

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (S8)

Dimensions & weight NHTSA vPIC

Overall length200.4 in
Overall width78 in
Overall height68.5 in
Wheelbase118.1 in
Curb weight5192 lb
Track (front / rear)64.2 / 65 in
Weight distribution (front / rear)50/50

Ratings & economy EPA / vPIC

EPA city / highway / combined16 / 21 / 18 mpg
DrivetrainAll-Wheel Drive
Recommended fuelPremium Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the Q7 of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

6.6–8.6 sec0–60 mph (tested)quickest 6.60 sec — 2011 3.0T Prestige S-Line Quattro
YearTrim / engine0–60¼ mileHPDrivetrain
20113.0T Prestige S-Line Quattro 3.0L Supercharged V66.60 sec15.00 sec280 hpAWD
20113.0 TDI Prestige S-Line Quattro 3.0L Turbo Diesel V68.30 sec16.40 sec225 hpAWD
20113.0 TDI Premium Plus Quattro 3.0L Turbo Diesel V68.60 sec16.50 sec225 hpAWD
20093.0 TDI Prestige S-Line Quattro 3.0L Turbo Diesel V68.40 sec16.40 sec225 hpAWD
20093.0 TDI Prestige S-Line Quattro 3.0L Turbo Diesel V68.60 sec16.60 sec225 hpAWD
20074.2 Premium S-Line Quattro 4.2L V87.30 sec15.50 sec350 hpAWD
20074.2 Premium Quattro 4.2L V87.50 sec15.60 sec350 hpAWD
20074.2 Premium Quattro 4.2L V87.80 sec15.80 sec350 hpAWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 8.6 qt of 5W-30 / 5W-40 / 0W-40 API engine oil, DOT 4 brake fluid. Torque lug nuts to 118 ft-lbs, the oil drain plug to 22.1 ft-lbs. The firing order is 1-5-3-6-2-4. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Automatic Transmission FluidAudi part number G055540A2
Automatic Transmission Fluid Capacity11
Brake FluidDOT 4
Differential Gear Oil Capacity2.7 Pints
Engine Oil5W-30 · 5W-40 · API · 0W-40
Engine Oil Capacity8.6 qt
Engine Oil5W-30 · 5W-40 · API
Engine Oil Capacity7.2 qt

Engine torques

Intake Manifold to Engine Bolts7.3 ft-lbs
Intake Manifold to Engine Bolts6.6 ft-lbs
Exhaust Manifold to Cylinder Head Bolts18 ft-lbs
Engine Oil Pan Drain Plug22.1 ft-lbs
Engine Valve Cover Bolts7.2

Chassis torques

Lug Nuts118 ft-lbs
Transfer Case Fill Plug18.0 ft-lbs
Transfer Case Drain Plug18.0 ft-lbs

Ignition

Cylinder Firing Order1-5-3-6-2-4
Spark Plug Torque22.0 ft-lbs

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.33-1.80 lbs
Oil GroupPAG
Oil Type46
Standard BCI Group Number94R Diesel
Standard BCI Cranking Performance640 Diesel cca
Optional BCI Group Number95R Diesel
Optional BCI Cranking Performance850 Diesel cca

Service checks

Pressure Test14.5 psi
Radiator Cap Pressure Relief20-23 psi
Engine Compression159-203 PSI @ RPM. 44 maximum variation PSI.

Brakes

Torque to Knuckle199
Rotor Nominal Thickness From1.339 in / 1.102 in
Rotor Nominal Thickness To1.339 in / 1.102 in
Rotor Discard at or Under1.26 in / 1.024 in

Multi-step torque procedures OEM · verified

Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
115 ft. lbs., step 2: 20 ft. lbs., step 3: replace bolt and shim15 ft. lbs
Cylinder Head — tightening sequence 4 stages

Prep Do not reuse old bolts. Use new bolts coated with clean engine oil. Tighten all bolts to finger tight then continue on with the following procedure.

126.0 ft. lbs.26 ft. lbs
244.0 ft. lbs.44 ft. lbs
390 degrees90 degrees
490 degrees90 degrees
Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Use new bolts coated with clean engine oil. Tighten all bolts to finger tight then continue on with the following procedure.

130.0 ft. lbs.30 ft. lbs
290 degrees90 degrees
390 degrees90 degrees
Cylinder Head — tightening sequence 3 stages

Prep Do not reuse old bolts. Use new bolts coated with clean engine oil. Tighten all bolts to finger tight then continue on with the following procedure.

130.0 ft. lbs.30 ft. lbs
290 degrees90 degrees
390 degrees90 degrees
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
1install by hand, step 211 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter at 5,000 mi; spark plugs at 55,000 mi.

At 5,000 miBrake System (inspect) · Diesel Emissions Fluid (fill) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Headlamp Washer Nozzle (inspect) · Headlamp Washer System (inspect fluid level)
Every 10,000 miBrake System (inspect) · Diesel Emissions Fluid (fill) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Headlamp Washer Nozzle (inspect) · Headlamp Washer System (inspect fluid level)
At 15,000 miAir Conditioning Evaporator Case Drain (inspect) · Battery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Engine Assembly (leak inspection)
Every 20,000 miAir Conditioning Evaporator Case Drain (inspect) · Battery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate) · Engine Assembly (leak inspection)
At 35,000 miBody Lock Cylinders (lubricate) · Brake Rotor (inspect) · Hood Latch (lubricate) · Power Steering System (inspect fluid level) · Transmission Assembly (drain & refill)
Every 40,000 miBody Lock Cylinders (lubricate) · Brake Rotor (inspect) · Hood Latch (lubricate) · Power Steering System (inspect fluid level) · Transmission Assembly (drain & refill)
At 55,000 miEngine Air Filter Element (replace) · Engine Air Filter Housing (clean) · Spark Plugs (replace)
Every 60,000 miEngine Air Filter Element (replace) · Engine Air Filter Housing (clean) · Spark Plugs (replace)
At 75,000 miDrive Belt (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 2011 Q7 sits in a relatively stable period of the first generation, with complaints dropping sharply from 95 in the debut 2007 model to just 23 in 2011, a figure comparable to the 21 in 2009 and 29 in 2010. Recalls, however, ticked up to 4 in 2011 from 3 in the three prior years, though this remains modest compared to the 7 recalls seen later in 2017. The top complaint areas for 2011 are minor, led by visibility/wiper issues at 7 reports, with only 1 crash complaint and no fire complaints recorded. While TSBs are high at 1,043, they follow a rising trend across the generation and do not signal a unique problem for this year. Overall, 2011 represents a low-complaint, relatively trouble-free point before a gradual uptick in issues later in the generation, making it a solid choice for a used Q7.

4
Open recalls
NHTSA campaigns
1043
Service bulletins
Manufacturer communications
1
ODI investigations
Office of Defects Investigation
23
Owner complaints
1 involved a crash · 0 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Rollover★★★★
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 23 complaints on record, top 8 components.

Visibility/Wiper7
Fuel/Propulsion System4
Unknown Or Other3
Engine2
Fuel System, Diesel1
Steering,Service Brakes1
Seats1
Electrical System1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 4 campaigns on record for this vehicle.

18V818000Fuel System, Gasoline:Delivery:Fuel PumpReported 19/11/2018

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2007-2012 Audi Q7 and 2009-2012 Audi Q5 vehicles, previously repaired under NHTSA recall 16V-660. These vehicles were previously repaired with an… Remedy: Volkswagen will notify owners, and dealers will replace the fuel pump flange and install butyl tape, free of charge. The recall began December 28, 2018. Owners may contact Audi…

16V660000Fuel System, Gasoline:Delivery:Fuel PumpReported 13/09/2016

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain model year 2009-2012 Audi Q5, and 2007-2012 Audi Q7 vehicles equipped with gasoline engines. The fuel pump flange on the affected vehicles may crack… Remedy: Audi will notify owners, and dealers will inspect the flange, replacing any flanges that are cracked. If the flange is not cracked, dealers will clean the pump flange and install…

Technical service bulletins NHTSA · verified

Showing 5 of 1043 bulletins on record with NHTSA.

BulletinDateComponentSummary
TSB_2059335_72026-06-23Electrical SystemThis bulletin provides information when there are noises from the area around the…
TSB_2082323_12026-06-10EngineThis bulletin provides informaiton when the engine is not running smoothly, misfiring.
TSB_2052680_62026-06-04Unknown Or OtherThis Reporting Obligation requires technicains to contact the Technical Assistance Center…
AOS-26-252026-05-26Unknown Or OtherThis is a notice for software changes with the ODIS diagnostic program to correct the…
TSB_2022032_122026-04-30Unknown Or OtherThis bulletin provides diagnostic information for the vehicle locking system.

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Q7. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2011 Q7 take?

8.6 qt of 5W-30 , 5W-40 API, OR 0W-40- MEETING VW SPECIFICATION VW50700, per the factory manual.

Does the 2011 Q7 have open recalls?

NHTSA lists 4 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the Q7 get?

EPA figures are 16 city / 21 highway / 18 combined mpg.