AudiQ5/SQ52017Overview/audi/q5-sq5/2017/base/

2017 Audi Q5/SQ5

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2017 Q5/SQ5.

Body SUV

The 2017 Audi Q5/SQ5 appears as an SUV, its engine requiring a 7.2‑quart oil capacity. Owner complaints total 42, with the engine as the foremost complaint area and five recall actions recorded, indicating a reliability profile that researchers should note. Thus, the 2017 model year sits within a generation that, while generally functional, exhibits a concentration of engine‑related concerns that define its current reliability standing.

Model year2017201620152014

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity7.2 qtOEM · verified
Lug nut torque118 ft-lbsOEM · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 06J115403Q. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Tire sizeP235/60R18; P235/55R19OEM · verified
Wheel / rimNS inOEM · verified

OE service part numbers OEM · verified

Engine oil filter06J115403Q alt 06D115475
Engine air filter8K0133843 alt 8K0133843M
Fuel filter8R0919679E
Spark plug06H905621A alt 06H905601A
Battery000915089BE
Front wiper blades8R1955426B alt 8R1955425B
Serpentine belt06E903137AB alt 06J260849F
Thermostat06H121113B alt 06E121119B
Cabin air filter8K0819439C

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine DOT 4 brake fluid. Torque lug nuts to 118 ft-lbs. The firing order is 1-4-3-6-2-5. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake FluidDOT 4
Engine CoolantUse Audi coolant part number G13TL-VW774J
Engine Coolant Capacity10.5
Engine CoolantUse Audi coolant part number G13TL-VW774J
Engine Coolant Capacity12.7
Engine Oil Capacity7.2 qt
Power Steering FluidUse Audi/VW part number G004000M2

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Engine Coolant Temperature (ECT) Sensor Bolt(s)7.4 ft-lbs
Oxygen (O2S) Sensor Bolt(s)30.0 ft-lbs
Knock Sense (KS) Bolt(s)14.75 ft-lbs
Engine Coolant Temperature (ECT) Sensor Bolt(s)15.0 ft-lbs

Chassis torques

Differential Fill Plug18.0 ft-lbs
Differential drain Plug18.0 ft-lbs
Lug Nuts118 ft-lbs
Transfer Case Fill Plug9.0 ft-lbs
Transfer Case Drain Plug9.0 if equipped with drain plug ft-lbs
Automatic Transmission Drain Plug18.0-22.0 ft-lbs

Ignition

Cylinder Firing Order1-3-4-2
Cylinder Firing Order1-4-3-6-2-5
Spark Plug Torque22.0 ft-lbs

Battery & A/C

RefrigerantR134a
Refrigerant Capacity1.18-1.25 lbs
Oil GroupPAG
Oil Type46
Oil Capacity3.40-4.00 oz

Service checks

Engine Compression159-203 PSI @ RPM; 44 MAXIMUM VARIATION. psi
Engine Compression159-203 PSI @ RPM; 44 MAXIMUM VARIATION. psi

Brakes

Brake Caliper Bolt to Carrier TorqueFront: 22.0; Rear: 26 Use
Brake Caliper Carrier to Hub Bolt TorqueFront: 145; Rear: 75 use
ABS Sensor Torque6.6
Minimum Pad Thickness0.394 including backing plate in
Vented Rotor Minimum Thickness for ReplacementFront w/1LJ and 1ZD:
Vented Rotor Minimum Thickness after RefinishStamped on rotor

Multi-step torque procedures OEM · verified

Front Wheel Hub — tightening sequence 1 stages

Prep Using new bolt

1146.0 ft. lbs., Step 2: 180 degrees.146 ft. lbs
Rear Wheel Hub — tightening sequence 1 stages

Prep Using new bolt

1146.0 ft. lbs., Step 2: 180 degrees.146 ft. lbs
Camshaft Bearing/Carrier Cap Bolts or Studs — tightening sequence 2 stages

Prep Gasoline engines

172.0 inch lbs.72 in
290 degrees; Diesel engines: NS90 degrees
Connecting Rod (Large End) Bearings — tightening sequence 1 stages

Prep Gasoline engines

133.0 ft. lbs., Step 2: 90 degrees; Diesel engines33 ft. lbs
122.0 ft. lbs., Step 2: 9022 ft. lbs
Connecting Rod (Large End) Bearings — tightening sequence 2 stages

Prep Gasoline engines

136.0 ft. lbs.36 ft. lbs
290 degrees; Diesel engines90 degrees
125.0 ft. lbs.25 ft. lbs
290
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
1110.0 ft. lbs. Step 2: + 90110 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 2 stages
1110.0 ft. lbs. Step 2: + 90 degrees110 ft. lbs
3Replace
Cylinder Head — tightening sequence 4 stages

Prep Do not re-use old bolts. · Long head bolts

1Tighten all bolts finger tight.
230.0 ft. lbs.30 ft. lbs
390 degrees90 degrees
490 degrees; Short head bolts (located in front of head)90 degrees
16.0 ft. lbs.6 ft. lbs
290 degrees90 degrees
Cylinder Head — tightening sequence 4 stages

Prep Do not re-use old bolts.

1Tighten all bolts finger tight.
229.5 ft. lbs.29.5 ft. lbs
390 degrees90 degrees
490 degrees90 degrees
Cylinder Head — tightening sequence 4 stages

Prep Do not re-use old bolts.

1Tighten all bolts finger tight.
230.0 ft. lbs.30 ft. lbs
390 degrees90 degrees
490 degrees90 degrees
Engine Flywheel Bolts — tightening sequence 2 stages
144.0 ft. lbs.44 ft. lbs
290
Engine Flywheel Bolts — tightening sequence 2 stages
144.0 ft. lbs.44 ft. lbs
290
Intake Manifold to Engine Bolts — tightening sequence 1 stages
17.0
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
18.9, Step 3: 11.8, Step 4:18.4
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
118.0
Exhaust Manifold to Cylinder Head Bolts — tightening sequence 1 stages
118.0
Main Bearings — tightening sequence 1 stages

Prep Gas engines · Cap bolts: Step 1: 48.0 ft. lbs., Step 2: 90 degrees, Side bolts: Step 1: 15.0 ft. lbs., Step 2: 90 degrees · Diesel engines

148.0 ft. lbs., Step 2: 9048 ft. lbs
Main Bearings — tightening sequence 3 stages

Prep Gasoline engines

133.0 ft. lbs.33 ft. lbs
290 degrees; Diesel engines90 degrees
122.0 ft. lbs.22 ft. lbs
236.0 ft. lbs.36 ft. lbs
3180

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 10,000 mi; spark plugs every 60,000 mi.

Every 10,000 miBrake System (inspect) · Engine Assembly (leak inspection) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Tire & Wheel Assembly (inspect) · Tire Pressure Monitoring System (reset)
Every 20,000 miAir Conditioning Evaporator Case Drain (inspect) · Air Intake Hose Debris Screen (clean) · Battery (inspect) · CV Joint Boot (inspect) · Cabin Air Filter (replace) · Door Hinge (lubricate)
Every 40,000 miBrake Rotor (inspect)
Every 60,000 miDrive Belt (replace) · Engine Air Filter Element (replace) · Engine Air Filter Housing (clean) · Spark Plugs (replace)
Every 80,000 miAccessory Drive Belt (inspect)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

Owner complaints about the 2017 Audi Q5/SQ5 dominate in one area — the engine, 13 of 42 reports (31%), well ahead of the next concern. That matters, because the engine are also the target of recall 17V-002 on this vehicle — so the single most useful check before buying or servicing one is confirming it was actually performed. 3 of the reports describe a crash and 0 a fire — a small share of the total, but worth weighing against the engine pattern above. These are tallies of what owners actually reported to the federal government, not an editorial score — and higher-selling models naturally rack up more reports.

5
Open recalls
NHTSA campaigns
720
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
42
Owner complaints
3 involved a crash · 0 a fire
NHTSA crash-test rating federal NCAP · out of 5 stars
Overall★★★★
Frontal★★★★
Side★★★★★
Rollover★★★★

Owner complaints filed with NHTSA, by component

All 42 complaints on record, top 8 components.

Engine13
Steering4
Fuel/Propulsion System3
Service Brakes2
Engine & Engine Cooling,Engine2
Fuel System, Gasoline2
Unknown Or Other2
Vehicle Speed Control,Service Brakes2

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 2 of 5 campaigns on record for this vehicle.

17V001000Visibility:Sun/Moon Roof AssemblyReported 03/01/2017

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2011-2017 Audi Q5 vehicles. The sunroof drainage system may allow water to soak into the foam surrounding the side head air bag inflator canister… Remedy: Audi will notify owners, and dealers will inspect the inflator and either coat it or replace it, as necessary, after removing the surrounding foam, free of charge. The recall is…

17V002000Engine And Engine Cooling:Cooling SystemReported 03/01/2017

Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2017 Audi A5, A5 Cabriolet and Q5 vehicles, 2013-2016 Audi Allroad and Audi A4 vehicles and 2012-2015 Audi A6 vehicles. These vehicles, equipped… Remedy: Audi will notify owners, and dealers will update the software so that the power supply to the coolant pump is deactivated if the pump becomes blocked with debris, free of charge…

Technical service bulletins NHTSA · verified

Showing 5 of 720 bulletins on record with NHTSA.

BulletinDateComponentSummary
TSB_2074640_32026-06-26EngineThis bulletin provides information when there is increased oil consumption; >0.5ltr/1000…
TSB_2074729_32026-06-23Electrical SystemThis bulletin provides informationwhen noises/vibration are detected from front of…
TSB_2059335_72026-06-23Electrical SystemThis bulletin provides information when there are noises from the area around the…
TSB_2082323_12026-06-10EngineThis bulletin provides informaiton when the engine is not running smoothly, misfiring.
TSB_2052680_62026-06-04Unknown Or OtherThis Reporting Obligation requires technicains to contact the Technical Assistance Center…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific Q5/SQ5. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2017 Q5/SQ5 take?

7.2 qt of Use only oil meeting Audi/VW specification 502.00, per the factory manual.

Does the 2017 Q5/SQ5 have open recalls?

NHTSA lists 5 recall campaign(s) for this model year. Check your specific vehicle by VIN.