Audiallroad2018Overview/audi/allroad/2018/base/

2018 Audi allroad

Factory specifications, fluid capacities, torque values, EPA fuel economy and the federal safety record for the 2018 allroad.

Transmission Automatic (AM-S7)

The 2018 Audi allroad is defined by a powertrain requiring 5.5 quarts of 5W-40 oil and an AM-S7 automatic transmission, returning EPA ratings of 22/30/25 mpg. Within the model’s 1998–2020 production span, this model year logged just one total owner complaint and one recall, matching the 1998 model for the lowest complaint count on record. That placement situates the 2018 allroad at the most favorable end of the nameplate’s reliability history, even though its single reported issue falls under the Power Train category.

Model year20192018201720162015201420132005

Quick specs

Fluid capacities, tune-up values and fuel economy at a glance.

Engine oil capacity5.5 qtOEM · verified
Engine oil type5W-40OEM · verified
Lug nut torque89 ft-lbsOEM · verified
EPA fuel economy22/30/25 mpgEPA · verified

Fitment & sizes

Replacement part sizes and factory part numbers — battery, bulbs, filters and belts.

From the factory this vehicle uses OE oil filter 06L115562B. Each part links to every other vehicle that shares it, so a part you already stock may fit more of your fleet than you'd expect.

Tire sizeP225/55R17, P245/45R18Y, P245/45R18H, P245/40R19OEM · verified

OE service part numbers OEM · verified

Engine oil filter06L115562B
Engine air filter8W0133843C
Spark plug06K905601B
Battery000915089BD
Front wiper blades8W1998002
Cabin air filter4M0819439C

Full specifications

Engine, drivetrain, dimensions and economy.

Engine & drivetrain NHTSA vPIC

TransmissionAutomatic (AM-S7)

Dimensions & weight NHTSA vPIC

Overall length187 in
Overall width72.4 in
Overall height58.7 in
Wheelbase111 in
Curb weight3825 lb
Track (front / rear)62.2 / 61.8 in

Ratings & economy EPA / vPIC

EPA city / highway / combined22 / 30 / 25 mpg
DrivetrainAll-Wheel Drive
Passenger volume90 cu ft
Cargo volume28 cu ft
Recommended fuelPremium Gasoline

Performance & power Independent road tests

0–60 mph, quarter-mile, horsepower and torque from independent road tests.

Independent road tests for the allroad of this era, listed by trim and engine — this page spans more than one engine, so no single horsepower figure is shown.

6.3–7.7 sec0–60 mph (tested)quickest 6.30 sec — 2014 Prestige Quattro Wagon
YearTrim / engine0–60¼ mileHPDrivetrain
2014Prestige Quattro Wagon 2.0L Turbo I-46.30 sec14.90 sec220 hpAWD
2013Prestige Quattro Wagon 2.0L Turbo I-46.40 sec14.90 sec211 hpAWD
2013Prestige Quattro Wagon 2.0L Turbo I-46.40 sec14.90 sec211 hpAWD
2013Prestige Quattro Wagon 2.0L Turbo I-46.50 sec15.00 sec211 hpAWD
2013Prestige Quattro Wagon 2.0L Turbo I-47.70 sec16.00 sec211 hpAWD

Service quick specs OEM factory data

Capacities, torques and tune-up values from the factory service manual.

This engine holds 5.5 qt of 5W-40 engine oil, DOT 4 brake fluid. Torque lug nuts to 89 ft-lbs. The firing order is 1-3-4-2. Note the cylinder-head bolts finish on a torque angle (torque-to-yield) — they stretch permanently and should be replaced, not reused, during any head service.

Lubricants & capacities

Brake FluidDOT 4
Clutch FluidDOT 4
Engine CoolantUse Audi coolant part number G13TL-VW774J
Engine Coolant Capacity10.5
Engine Oil5W-40
Engine Oil Capacity5.5 qt
Manual Transmission FluidUse Audi/VW part number 055532A2
Power Steering FluidEPS

Engine torques

Crankshaft Position (CKP) Sensor Bolt(s)7.4 ft-lbs
Camshaft Position (CMP) Sensor Bolt(s)7.4 ft-lbs
Engine Coolant Temperature (ECT) Sensor Bolt(s)7.4 ft-lbs
Oxygen (O2S) Sensor Bolt(s)30.0 ft-lbs
Knock Sense (KS) Bolt(s)14.75 ft-lbs
Intake Manifold to Engine Bolts6.6 ft-lbs
Exhaust Manifold to Cylinder Head Bolts18.4 ft-lbs
Nitrogen Oxide (NOX) Sensor Bolt(s)35.0 ft-lbs

Chassis torques

Lug Nuts89 ft-lbs

Ignition

Cylinder Firing Order1-3-4-2
Spark Plug ManufacturerAudi
Spark Plug Torque22 ft-lbs

Service checks

Fuel Pump Pressure Minimum87.0 psi
Fuel Pump Pressure Maximum119.0 psi
Residual Pressure43 psi
Engine Compression159-203 psi @ RPM / Maximum Variation 44 psi

Multi-step torque procedures OEM · verified

Front Wheel Hub — tightening sequence 1 stages
1148.0 ft. lbs., Step 2: 180.0°148 ft. lbs
Rear Wheel Hub — tightening sequence 1 stages
1148.0 ft. lbs., Step 2: 180.0°148 ft. lbs
Connecting Rod (Large End) Bearings — tightening sequence 1 stages

Prep Gasoline engines

133.0 ft. lbs., Step 2: 90 degrees; Diesel engines33 ft. lbs
122.0 ft. lbs., Step 2: 9022 ft. lbs
Crankshaft Pulley and/or Damper Bolts — tightening sequence 1 stages
1110.0 ft. lbs., Step 2: 90110 ft. lbs
Cylinder Head — tightening sequence 5 stages

Prep Do not re-use old bolts. · Long head bolts

1Tighten all bolts finger tight.
222.0 ft. lbs.22 ft. lbs
344.3 ft. lbs.44.3 ft. lbs
490 degrees90 degrees
590 degrees; Short head bolts (located in rear of head)90 degrees
16.0 ft. lbs.6 ft. lbs
290 degrees90 degrees
Engine Flywheel Bolts — tightening sequence 2 stages
144.0 ft. lbs.44 ft. lbs
290
Main Bearings — tightening sequence 1 stages

Prep Gas engines · Cap bolts: Step 1: 48.0 ft. lbs., Step 2: 90 degrees, Side bolts: Step 1: 15.0 ft. lbs., Step 2: 90 degrees · Diesel engines

148.0 ft. lbs., Step 2: 9048 ft. lbs

Factory maintenance schedule OEM · verified

Normal service, condensed from the factory interval matrix.

Under the factory schedule, replace the engine oil and filter every 10,000 mi; spark plugs every 40,000 mi.

Every 10,000 miBrake Linings (inspect) · Engine Oil (drain & refill) · Engine Oil Filter (replace) · Tire Repair Kit Sealant (inspect)
Every 20,000 miBody Latches, Locks & Hinges (lubricate) · Brake Line (inspect) · Cabin Air Filter (replace) · Drive Axle Assembly (inspect) · Engine Coolant System (inspect fluid level) · Exterior Lighting (inspect)
Every 40,000 miSpark Plugs (replace) · Transmission Assembly (drain & refill)
Every 60,000 miEngine Air Filter Element (replace)

Reliability & federal safety record

Owner-reported issues, recalls, investigations and service bulletins on record with NHTSA — an unfiltered look at what owners actually experience.

The 2018 Audi allroad occupies a favorable position in the vehicle's historical record, showing significantly fewer federal complaints than the high-volume 2002 and 2003 model years which recorded 104 and 85 issues respectively. Within the recent data sequence starting in 2013, the 2018 model continues a downward trend in Technical Service Bulletins, dropping to 252 from the 2015 peak of 736. Federal records show only one complaint for 2018, categorized under Power Train, while the subsequent 2020 model year reports zero complaints. Although one recall was issued for 2018, this aligns with the single recall recorded for 2017 and is substantially lower than the seven recalls issued in 2003. The data indicates a maturing model line with diminishing reported issues, making the 2018 model year a strong candidate for purchase based on its low complaint volume and improving trend line.

1
Open recalls
NHTSA campaigns
252
Service bulletins
Manufacturer communications
0
ODI investigations
Office of Defects Investigation
1
Owner complaints
0 involved a crash · 0 a fire
Owner complaints by model year NHTSA · this generation & adjacent

Owner complaints filed with NHTSA, by component

All 1 complaints on record, top 1 components.

Power Train1

Source: NHTSA Office of Defects Investigation complaint database.

Recalls NHTSA · verified

Showing 1 of 1 campaigns on record for this vehicle.

19V547000Air Bags:Frontal:Passenger Side:Inflator ModuleReported 24/07/2019

Volkswagen Group of America, Inc. (Audi) is recalling certain 2018-2019 Audi RS5 Sportback, 2018 S5 Cabriolet, S5 Sportback, S5 Coupe, S4 Sedan, A5 Cabriolet, A5 Sportback, A5 Coupe, and 2017-2018 A4 Sedan and A4… Remedy: Audi will notify owners, and dealers will install cable ties to the harness, free of charge. The recall began September 9, 2019. Owners may contact Volkswagen customer service at…

Technical service bulletins NHTSA · verified

Showing 5 of 252 bulletins on record with NHTSA.

BulletinDateComponentSummary
A9424792063739_22024-04-12Exterior LightingThis bulletin provides information when the headlights do not turn off during daylight…
A9023532058077_82023-11-15Service BrakesThis bulletin provides information for when there is a warning, warning jolt and/or brake…
A0023752066297_32023-10-09EquipmentThis bulletin provides details on the VIN-4-PIN program.
A0023742052680_42023-10-04EquipmentThis bulletin provides information on the additional reporting requirements for safety…
A8723372055257_62023-01-17VisibilityThis bulletin provides directions when the customer describes a problem with the HVAC…

Common OBD-II trouble codes

The most common OBD-II codes for this vehicle's emissions system. These are standardized SAE J2012 definitions, not vehicle-specific fault reports.

P0420
Catalyst system efficiency below threshold — Bank 1
P0300
Random / multiple cylinder misfire detected
P0171
System too lean — Bank 1
P0455
Evaporative emission system leak detected — large leak
P0128
Coolant thermostat below regulating temperature
P0442
Evaporative emission system leak detected — small leak

VIN tools

Decode factory build data for a specific vehicle by VIN.

VIN
Decode a VIN to confirm the transmission and build data for a specific allroad. OEM
Build data
Plant, GVWR class, engine and body data for any 17-character VIN.
Recalls
Check open recall campaigns against a specific vehicle by VIN.

Vehicles with shared specs

Find every vehicle that shares this one's battery, bulbs, oil capacity, platform or parts.

Reference guides

Cross-vehicle references for the kinds of data on this page.

Frequently asked

How much oil does the 2018 allroad take?

5.5 qt of 5W-40 Meeting Audi/VW specification 502 00 or equivalent, per the factory manual.

Does the 2018 allroad have open recalls?

NHTSA lists 1 recall campaign(s) for this model year. Check your specific vehicle by VIN.

What gas mileage does the allroad get?

EPA figures are 22 city / 30 highway / 25 combined mpg.