Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 7,500 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 6,000 mi | Brake Line (inspect) · CV Joint Boot (inspect) · Differential (inspect fluid level) · Driveshaft U-Joint (lubricate) · Engine Coolant System (leak inspection) · Exhaust System (Complete) (inspect) |
| Every 7,500 mi | Engine Oil (drain & refill) · Fuel Line (inspect) |
| Every 12,000 mi | Fuel Filter (replace) · Water Pump (inspect) |
| Every 15,000 mi | Accessory Drive Belt (inspect) |
| Every 18,000 mi | Accessory Drive Belt (inspect) · Brake Linings (inspect) |
| Every 24,000 mi | Bands (adjust) · Crankshaft Vibration Damper (inspect) · Engine Air Filter Element (replace) · Engine Breather Filter (clean) · Engine Valves (inspect valve lash) · Radiator Fan Clutch (inspect) |
| Every 30,000 mi | Engine Coolant System (drain, flush & refill) |
| Every 48,000 mi | Intake Air Temperature Sensor (inspect) |
| At 60,000 mi | Accessory Drive Belt (inspect) · Engine Coolant System (drain, flush & refill) · PCV Valve (inspect) |