U0572 is a network communication fault code indicating that one or more control modules on the vehicle's CAN (Controller Area Network) bus received invalid, corrupted, or nonsensical data from the Vehicle Motion Control Module (also called Chassis Control Module or Vehicle Dynamics Control Module). This module typically manages stability control, traction control, anti-lock braking integration, and sometimes electric power steering functions.
The module itself is producing corrupted or invalid data due to internal electronic failure, which is the most common cause of this code.
Oxidation, corrosion, or loose pins at the module's connector can cause data corruption or intermittent communication failures.
Weak ground connection or insufficient voltage to the module (from a failing fuse, relay, or wiring issue) can cause the module to send invalid data.
Physical damage to the CAN communication wires (chaffed, melted, or shorted) between modules can corrupt data transmission.
Another module (such as the ABS pump, steering sensor, or wheel speed sensors) may be sending corrupted data that the motion control module relays.
The engine computer very rarely causes U0572; network codes almost always originate from the module listed in the code or its wiring, not the PCM.
No. While some shops may suggest replacing the engine computer for U0572, this is almost never the correct fix. U-codes are network communication faults that almost always originate from the module listed in the code (Vehicle Motion Control Module) or its wiring and connections, not the PCM.
Driving is possible but not recommended. The vehicle's stability control, traction control, and potentially ABS functions may be disabled or unreliable, reducing vehicle control especially in adverse conditions or emergency maneuvers.
Yes, indirectly. Insufficient voltage to the Vehicle Motion Control Module due to a weak battery, failing alternator, or poor charging system can cause the module to malfunction and send invalid data on the network.
Costs vary widely depending on the cause. Connector cleaning or ground repair may cost $100-200, while module replacement (if needed) can range from $400 to over $1,000 including programming on some vehicles. Get a proper diagnosis before replacing expensive components.