Factory maintenance schedule OEM · verified
Normal service, condensed from the factory interval matrix.
Under the factory schedule, replace the engine oil and filter every 15,000 mi; spark plugs every 30,000 mi; coolant every 30,000 mi. The big-interval services (every 30,000 mi for coolant, and the transmission fluid) are the ones owners most often skip — on a lower-mileage example, assume the original fluids are still in it and check them first.
| Every 7,500 mi | Axle Shaft Oil Seal (inspect) · Brake Hydraulic System (inspect fluid level) · Brake Line (inspect) · CV Joint Boot (inspect) · Clutch Master Cylinder (inspect fluid level) · Engine Coolant System (leak inspection) |
| Every 15,000 mi | Accessory Drive Belt (inspect) · Engine Oil Filter (replace) |
| Every 22,500 mi | Brake Linings (inspect) · Wheel Bearing (inspect) |
| Every 30,000 mi | Engine Air Filter Element (replace) · Engine Breather Filter (replace) · Engine Coolant System (drain, flush & refill) · Exhaust System (Complete) (inspect) · Spark Plugs (replace) · Suspension Ball Joint (inspect) |
| At 52,500 mi | Engine Coolant System (drain, flush & refill) |
| At 60,000 mi | Accessory Drive Belt (inspect) |
| Every 60,000 mi | Accessory Drive Belt (inspect) · Distributor Cap (inspect) · Distributor Rotor (inspect) · Emission Control System (inspect) · PCV Valve (inspect) · Spark Plug Wires (replace) |